C9600 User’s Guide> 47
T
URNING
O
N
NOTE
If you have used the Shutdown/Restart button to reduce the
printer to a state where the LCD panel indicates it can be
turned off or restarted, you can turn it on again by pressing the
Shutdown/Restart button.
1. To start the printer after it has been turned off by using
the Power switch, set the Power switch to On.
C
HANGING
THE
DISPLAY
LANGUAGE
Carry out the following steps to change the language that is
displayed on the LCD display:
1. Ensure that the LCD panel indicates that the printer is
ready to print.
2. Enter menu mode by pressing either the Up-arrow or
Down-arrow button and press them repeatedly as
required until Menus is highlighted.
3. Press the Enter button to select Menus.
4. Press the Up-arrow or Down-arrow buttons repeatedly
as required until System Adjust is highlighted.
5. Press the Enter button to select System Adjust.
To Next Page
Loading...
Need help?
General
