C9600 User’s Guide> 8
WARNING!
Always hold the power plug to connect/
disconnect the power cable to/from the mains
socket. Unplugging by pulling on the cable can
cause fraying and may lead to fire or electric
shock.
Use only the power cable and power strip
supplied. Using a power cable or power strip
not intended for this product may lead to fire or
electric shock.
To avoid risk of fire and electric shock, do not
use the power cable or power strip supplied
with this product for any other electrical
equipment.
If you do not connect the power cord or any
other cables only as directed in the User's
Guide, this may result in a fire.
Ensure loose clothing and hair are kept clear of
moving parts when this product is in operation
to prevent possible risk of injury.
It is recommended that this product is
switched off prior to opening any covers.
When this product's cover is open, do not touch
the fuser unit or print head as you may receive
burns. Allow them to cool before touching.
To Next Page
Loading...
Need help?
General
