C9800 Utilities Guide
Storage Device Manager • 140
Setting Up an Administrative Password
1. With the Storage Device Manager program open, click
Administrator Functions in the Printers menu.
password.tif
2. Under Enter Password, type in the default password
(p1xs7d0m). Click Change Password.
3. Under New Password, type the 8-digit, alpha-numeric password
of your choice.
4. Under Confirm New Password, type the password again.
New Password Accepted appears.
5. Click OK.
6. Click Exit twice.
NOTE
Passwords consist of eight digits, letters or numbers, and
are case sensitive.
To Next Page
Loading...
