C9800 Utilities Guide
Storage Device Manager • 149
Forms
PCL
Step 1: Create the Forms in Your Software Application
1. Create the document in your software application.
2. Click File → Print and make sure the OKI PCL driver is
selected.
3. Print the document to a file using the extension PRN.
Step 2: Create a New Project
1. Open Storage Device Manager.
2. Click Projects → New Project.
The Project dialog box opens.
3. Click Projects → Save Project. Enter the path/name for
storing the project on your hard drive or your network. Click Save.
Important!
Remember that file names and paths are case sensitive.
To Next Page
Loading...
