C9800 Utilities Guide
Storage Device Manager • 162
Overlays
Requirements
Read This First
Hardware / Software Requirements
• the Storage Device Manager software must be installed.
Required Actions
Before overlays can be printed, they must be
• created in a software application
• saved as a print file
• downloaded to storage
Important!
1. An overlay may consist of more than one component file.
2. You must use the Shutdown Menu before turning OFF the
printer.
3. If your software application has a collate print option, you must
turn it OFF before you print overlays.
4. You cannot use overlays with the:
• Windows 2000 PostScript driver
• Macintosh driver
5. The message DISK FULL appears if there isn’t enough
memory for the data.
To Next Page
Loading...
