C9800 Utilities Guide
Storage Device Manager • 167
6. Note the name that the file is assigned in the Storage Device
Manager.
Names are case sensitive.
7. Make sure the printer being used is highlighted in the lower
window of the Storage Device Manager.
8. Select the Project menu. Choose Send Project Files to Printer.
This downloads the file to the printer.
If the file was downloaded successfully, "Command Issued"
displays.
9. Close the Storage Device Manager.
NOTE
The assigned file name is very important!
You must use this ID number or name when creating
overlays in the printer driver.
You should change the ID number or name from the default
value.
Note the new name for later use.
To Next Page
Loading...
