- 104 -
Setting Power Save Mode
Setting Up
2
Printing
3
Before use
1
Basic Device Operations
4
Appendix Index
6
Select [Enable], and press the [OK]
button.
7
Press the [ON LINE] button to return to
the standby screen.
Memo
Other items can also continue to be set before
pressing the [ON LINE] button.
Setting the time before the
printer enters power save mode
You can set the time until power save mode is
entered.
The default factory setting is "1 min."
Lengthening the time until power save mode
is entered may shorten the time until printing
starts.
1
Press the [Fn] key.
The numerical values input screen will
be displayed.
2
Enter [2], [0], [0], and press the [OK]
button.
3
Select the time to be set, and press the
[OK] button.
To Next Page
Loading...
Need help?
General
