Maintenance > 119
M
AINTENANCE
R
EPLACING
 
CONSUMABLE
 
ITEMS
Only use genuine original consumables to ensure the best quality and 
performance from your hardware. Non original products may adversely affect 
your printer's performance and invalidate your warranty.
T
ONER
 
CARTRIDGE
 
REPLACEMENT
The toner used in this printer is a very fine dry powder. It is contained in four cartridges: 
one each for cyan, magenta, yellow and black.
Have a sheet of paper handy so that you have somewhere to place the used cartridge while 
you install the new one.
Dispose of the old cartridge responsibly, inside the recycle bag that came with the new 
cartridge. Follow any regulations, recommendations, etc., which may be in force 
concerning waste recycling.
If you do spill any toner powder, lightly brush it off. If this is not enough, use a cool, damp 
cloth to remove any residue.
Do not use hot water, and never use solvents of any kind. They will make stains permanent.
NOTE
When the LCD display indicates TONER LOW, or if print appears faded, first 
open the top cover and try tapping the cartridge a few times to evenly 
distribute the toner powder. This will enable you to obtain the best “yield” from 
your toner cartridge.
CAUTION!
To avoid toner wastage and possible toner sensor errors, do not 
change the toner cartridge(s) until “TONER EMPTY” is displayed.
WARNING!
If you inhale any toner or get it in your eyes, drink a little water or 
bathe your eyes liberally in cold water. Seek medical attention 
immediately.