Installing upgrades > 136
SD
CARD
(MC562dn, MC562w, MC562dw, ES5462 MFP, ES5462dw MFP
AND
MPS2731mc
ONLY
)
The SD card enables collating of printed pages and can be used to store overlays and
macros, fonts, and secure or proof documents waiting to be printed.
Your machine is fitted with a 4GB SD card as standard. If you wish you can upgrade this
as your machine supports 16GB SD cards. After replacement, you need to configure the
printer driver settings. Refer to “Setting the driver device options” on page 139.
1. Switch the MFP off and disconnect the power cable. Refer to “Turning off your
machine” on page 21 for details.
2. Remove the outer access cover and place it safely to one side.
3. Turn locking screw (a) anti-clockwise and remove the inner access cover (b). Place it
safely to one side.
4. Notice that the SD card has one chamfered corner.
To Next Page
Loading...
