Appendix A - menu system > 170
Fax Setup
a
Default Settings Resolution Normal Refer to “Advanced
operation” on page 95
for further details.
Density 0
Scan Size A4
Continuous Scan OFF
TTI ON
Transmit Confirmation
Report
OFF
Memory Tx ON
Fcode Box
Register Confidential Box
Box Name
Sub-Address
Hold Time
I.D.Code
user defined
user defined
0
user defined
Confidential Box:
received data
cannotbe printed
without entering ID
code (for secret
documents).
You can also enter a
Box Name, Password
and specify the hold
time for your secure
box.
Range: 00 - 31
Bulletin Box
Box Name
Sub-Address
user defined
user defined
Bulletin Box: Enable
to transmit/receive
documents to/from
Bulletin.
Edit Edit settings. Refer to options above for
details.
Delete Yes, No Delete entry.
Security
Function
ID Check Tx OFF Check and match the
last four digits of the
destination fax
numbers with those
registered in the
target. If ON, the MFP
will send only when
they match.
Broadcast Destination ON Fax number
confirmation screen
displays before
sending the fax.
Confirm Dial OFF When ON, you will be
asked to reenter the
destination fax
number.
The fax will only be
sent when the two
numbers match.
Other Settings Redial Tries 2 time(s) Set the number of
redial attempts.
Range: 0 - 10 time(s)
Redial Interval 1 minute(s) Set the time between
redial attempts.
Range: 0 - 5 minute(s)
ITEM OPTION DEFAULT VALUE/DESCRIPTION
To Next Page
Loading...
