Oki ES5463 User Manual (English)

Other manuals for Oki ES5463

Questions and Answers:

P
Peter RiceAug 25, 2025
What to do if my Oki ES5463 is unable to send a fax?
- J
  jameslawsonAug 25, 2025
  If your Oki All in One Printer is unable to send a fax, first, double-check that you are following the correct sending procedure. Verify that you have entered the correct fax number. If using speed dial, print the list to confirm the number's accuracy. Ensure you've selected the appropriate dial type for your region. Check with the recipient to ensure their machine is ready to receive. If the Transmit/Receipt Journal shows error code [23], adjust the [MF(Tone)/DP(Pulse)] setting in [Admin Setup] > [User Install] to match your environment. If error code [26] appears, modify the [PBX Line] setting under [Admin Setup] > [Fax Setup] > [Fax Setting].
M
Mary ClarkAug 27, 2025
What to do if the copied output size is different from the original document size on my Oki All in One Printer?
- V
  valenzuelalaurieAug 28, 2025
  If the copied output size differs from the original document size on your Oki All in One Printer, ensure that the proper size paper for the document is loaded in the paper tray. Also, verify that the zoom rate is properly set and that [Repeat] is set to [OFF].
T
Thomas ThomasAug 29, 2025
What to do if a copy job is cancelled on Oki All in One Printer?
- S
  stevenbrownAug 30, 2025
  If a copy job is cancelled on your Oki All in One Printer, it may be due to an error. Clear the error and try copying again. If you're using the MP tray, ensure enough paper is loaded before starting. Press the (SETTING) button, select [Paper Setup] > [Select Tray] > [Copy] > [MP Tray], and check that [ON] or [ON(Prior)] is selected.
S
Sandra HerreraAug 31, 2025
How to fix incorrect network connection settings while printing with my Oki All in One Printer?
- K
  Katelyn RobinsonAug 31, 2025
  To fix incorrect network connection settings while printing with your Oki All in One Printer: * If you are using a cross cable, use a straight cable instead. * Ensure cables are connected before turning the machine on. * If there is a problem with hub compatibility, press the (SETTING) button, select [Admin Setup] > [Network Menu] > [Network Setup] > [Network Setting] > [HUB Link Setting], and then change the setting. * To connect to a wired network, set [Wired] for the network connection to [Enable].
S
Shelby JohnsonSep 2, 2025
How to fix the IP address if it is incorrect while printing from my Oki All in One Printer?
- P
  Priscilla BondSep 2, 2025
  To resolve an incorrect IP address while printing from your Oki All in One Printer: * Check that the same IP address is set for the machine and the machine's port setting on the computer. * Ensure the IP address is not duplicated by another device. * Verify that the correct IP address, subnet mask, and gateway address are set. * If using OKI LPR Utility, check the IP address setting with OKI LPR Utility.
D
Dean Hammond DDSSep 4, 2025
Why is the copied output different from the original document on my Oki All in One Printer?
- M
  Mary WhiteSep 4, 2025
  If the copied output differs from the original document on your Oki All in One Printer, check if [Duplex Copy] is set to [OFF(Simplex)] and [Mixed Size] is set to [OFF].
K
kathryntaylorSep 5, 2025
What to do if a part of the document image is missing on the copied output from my Oki All in One Printer?
- R
  Rebekah WolfeSep 6, 2025
  If a part of the document image is missing on the copied output from your Oki All in One Printer, ensure that [Edge Erase], [Margin], and [N-in-1] are all set to [OFF].
K
Kristen FosterSep 7, 2025
Why is my Oki All in One Printer taking a long time to start copying?
- B
  Brenda FieldsSep 7, 2025
  If your Oki All in One Printer is taking a long time to start copying, it might be in the process of preparing. If [Warming Up] or [Preparing] is displayed on the screen, wait until the process is complete and the copy starts.
A
Ashley RogersSep 9, 2025
How to resolve 'Connect to PC failed' message on my Oki All in One Printer?
- S
  Steven WebbSep 9, 2025
  If you see the message "Connect to PC failed" on your Oki All in One Printer, it could be due to a changed IP address on the computer, the computer not being turned on, or the computer not being connected to a network. To resolve this, re-register the computer to the machine, ensure the computer is turned on, and verify the network connection.

Oki ES5463 Specifications

General

Brand	Oki
Model	ES5463
Category	All in One Printer
Language	English

Oki ES5463 Advanced Manual

Table of Contents

Other manuals for Oki ES5463

Questions and Answers:

Oki ES5463 Specifications