What to do when received documents are light or have vertical streaks on Oki All in One Printer?
Gently wipe the lens surface of the MFP's LED array, and then check to see if the machine is working properly. Then check to see if the toner or image drum need replacing.
What to do if vertical lines appear on Oki All in One Printer printouts?
If vertical lines appear on your printouts from the Oki All in One Printer, it could be due to a damaged image drum cartridge. Replace the image drum cartridge. Also, the toner may be low. Open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If the issue continues, replace the toner cartridge.
Why are images fading vertically on my Oki All in One Printer?
If printed images from your Oki All in One Printer are fading vertically, the LED head may be dirty. Wipe the LED head with a soft, lint-free cloth. Also, the toner may be low. Open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If symptoms persist, replace the toner cartridge. The paper may also not be suitable for the printer unit, so use recommended paper.
How to troubleshoot horizontal lines and spots on Oki All in One Printer?
If you're seeing horizontal lines and spots appearing periodically on printouts from your Oki All in One Printer, the cause depends on the interval between the lines. If the interval is about 94mm (4in), the image drum may be damaged or dirty; wipe it lightly with a soft cloth or replace it if damaged. If the interval is about 30mm (1.2in), there may be foreign particles in the image drum cartridge; try opening and closing the top cover, and print again. If the interval is about 86mm (3.4in), the fuser unit is damaged, and you should replace it. Another possible reason is that the image drum cartridge has been exposed to light, replace the image drum cartridge if the problem is not resolved.
What causes partially faded images on Oki All in One Printer?
If you're getting partially faded images with white spots and lines in solid printing from your Oki All in One Printer, the paper may be moist or dry. Use paper stored in proper temperature and humidity conditions.
Why does toner come off when rubbed on Oki All in One Printer prints?
If the toner comes off when rubbed on printouts from your Oki All in One Printer, the thickness and type of the paper may be incorrectly set. Set the correct value of media type and media weight in the Media menu or set one value lighter for media weight. If you are using recycled paper, set one value thicker for media weight in the Media menu.
Why does Oki All in One Printer answer before external telephone can be used?
If an external telephone is connected, increase the machine’s ring response setting.
Why didn't Oki All in One Printer send delayed transmission?
Check the display to make sure that the MFP is set to the correct time and date.
Why does nothing happen when using Speed Dial on Oki All in One Printer?
Make sure that the Speed Dial number being used is programmed correctly on your Oki All in One Printer.
Why is the image of received fax very poor on Oki All in One Printer?
Try making a copy of a document on the local machine to make sure it is working properly. If there is still a problem, contact the person sending the fax and ask them to change their fax quality and density settings. Ask the person to make a copy of the document on their machine to ensure that it is working properly. Then ask them to send the fax again.
General| Print Speed (Black) | 30 ppm |
|---|---|
| Print Speed (Mono) | 30 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Copy Speed (Black) | 30 cpm |
| Fax Modem Speed | 33.6 Kbps |
| Paper Capacity | 250 sheets |
| Product Type | All-in-One Printer |
| Functions | Copier, Printer, Scanner |
| Connectivity | Ethernet, USB |
| Scanner Type | Flatbed, ADF |
| Paper Size | A4, A5, B5, Legal, Letter |
| Interface | USB 2.0, 10/100 TX Ethernet |
| Supported Media Sizes | A4, A5, A6, B5, Legal, Letter, Executive |
To Next Page
