Network configuration > 20
E-Mail (Send) Tab
This allows you to configure SMTP
related items.
ITEM EXPLANATION
Use SMTP
Trans mit
Check to enable SMTP
SMTP Server
Name
Enter name of the SMTP server
Printer E-Mail
Address
Enter the printers e-mail address
Destination
Address 1 - 5
Set the following parameters:
Destination Address Set E-Mail address to which email
should be sent.
Notify Mode Select PERIOD or EVENT
When PERIOD is selected:
Check time Used to set the interval at which
the selected events are checked.
An e-mail will be sent at the
specified interval for each event
selected.
Period mode Set ON/OFF for the events listed.
When EVENT is selected:
Event Mode Select:
ENABLE (ON), DISABLE (OFF) or
IMMEDIATE (NOWAIT) for the listed
events. If ENABLE (ON) is selected,
the check interval is settable in
hours and intervals of 15 mins.
Attach Info... Select whichever information is to be included in the e-
mail.
To Next Page
Loading...
Need help?
General
