Oki MB290 - Fax Parameters; Access to Fax Parameters; Description of the Tab Fax Parameters; Description of the Tab Logs and Reports

MB290
- 79 -
PC Features
Fax parameters
Access to fax parameters
1 Click on the icon of the window COMPANION
D
IRECTOR.
2 Select T
OOLS > OPTION > FAX.
3 Make the adjustments required, referring to the
description of parameters below and click OK.
Description of the tab LOGS AND REPORTS
Description of the tab FAX PARAMETERS
Option Description
Automatic printing
of a received
document
The fax is automatically printed
when received.
Printing of a inbox
report
A report is printed out for each
fax received.
Printing of inbox log
The log is automatically printed
when its contents fill a page.
Automatic printing
of a sent document
The fax is automatically printed
when it is sent.
Printing of an
outbox report
An outbox report is printed after
each fax is sent.
Printing of the
outbox log
The log is automatically printed
when its contents fill a page.
Option Description
Transmission
speed
Fax default transmission
speed.
Line number
Number of the line where your
terminal is connected.
Dialling prefix
This dialling prefix shall be
automatically inserted in front
of the number before sending
on this line.
Type of dialing
Must be parametered
according to the type of
switchboard your terminal is
connected to.
Header
Displays a Communication
Identification Line (LIC) on the
documents you send or on the
documents you receive.
ECM
Corrects communication errors
due to line disturbance. This
option ensures that received
documents are integral. On the
other hand, communication
times may be longer if the line
is bad.
Number of attempts
Number of attempts the
Terminal must make if send
fails.
Interval between
attempts
Duration between two send
attempts.