Oki MB770 - Setting Original Modes; Density Adjustment

BASIC COPY MODES
- 46 -
1
2
3
4
5
6
Setting Original Modes
You can make copies with the optimal image quality by
selecting the following modes for your original.
1
Press [ORIGINAL MODE] on the touch
panel.
2
Select the original mode, and then press
[OK].
Density Adjustment
This equipment detects the density level of originals and
automatically adjusts the density level of the copied image to
the optimal one. Alternatively, you can manually adjust it to the
desired level.
Adjusting automatically (automatic density
adjustment)
Press [AUTO] on the touch panel.
Memo
• The automatic density adjustment is set by default at
installation.
Adjusting manually
Press either or to select the desired density level.
Original mode Description
TEXT/PHOTO Originals with text and photographs mixed
TEXT Originals with text (or text and line art) only
PHOTO
Originals with general photographs on
photographic printing paper
Originals with photographs