Oki MC352 User Manual

- 28 -
Initial Setup for Faxing
3
Faxing (For MB362, MB562, ES5462 MFP only)
Connecting to an ADSL Environment
Note
● Do not connect with USB cable or LAN cable at this point.
First, check that the machine is turned off. If
the machine is turned on, hold down the power
switch for approximately one second to turn off
the power.
Plug the [Telephone cable] connected to the
ADSL modem into the [LINE connection] of
your machine.
Remove the telephone connector cover.
Plug the external telephone’s cable into the [TEL
connection] of your machine.
LINE connection
Telephone cable
Public Line
(Analog)
TEL connection
Splitter
ADSL modem
Memo
● Check the dial tone detection if it is unable to dial. Refer to
the Conguration Guide > “Appendix A - menu system” >
“Admin Setup” > “User Install”.
● If you cannot send or receive faxes very well, set [Super
G3] to [OFF]. Refer to “Step 3-5 Setting for Super G3”
P.35 in detail.
Connecting to an IP Telephone
Note
● Do not connect with USB cable or LAN cable at this point.
First, check that the machine is turned off. If
the machine is turned on, hold down the power
switch for approximately one second to turn off
the power.
Plug the
[Telephone cable] connected to the
IP telephone into the [LINE connection] of
your machine.
Remove the telephone connector cover.
Plug the external telephone’s cable into the
[TEL connection] of your machine.
LINE connection
Telephone cable
TEL connection
Optical IP telephone
Corresponding
telephone
LAN
cable
Optical cable
Optical Network
Unit (ONU)
*Insert into the
telephone cable jack.
Memo
● Check the dial tone detection if it is unable to dial. Refer to
the Conguration Guide > “Appendix A - menu system” >
“Admin Setup” > “User Install”.
● If you cannot send or receive faxes very well, set [Super
G3] to [OFF]. Refer to “Step 3-5 Setting for Super G3”
P.35 in detail.

Oki MC352 Specifications

General

Print Technology	LED
Print Resolution	1200 x 600 dpi
Copy Resolution	600 x 600 dpi
Fax	Yes
Fax Transmission Speed	33.6 Kbps
Paper Capacity	250 sheets
Multi-Purpose Tray Capacity	100 sheets
ADF Input Capacity	50 sheets
Maximum Input Capacity	350 sheets
Standard Output Capacity	150 sheets
Maximum Print Size	A4
Internal Memory	256 MB
Processor Frequency	533 MHz
Dimensions	427 x 509 x 444 mm
Weight	29 kg
Operating System Compatibility	Windows, Mac OS, Linux
Monthly Duty Cycle	45, 000 pages
Scanner Type	Flatbed/ADF
Scan Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet
Display	3.5 inch LCD