Oki MC352 User Manual

- 53 -
Scanning to E-mail
4
Scanning
Step 2 Conguring the E-mail Settings of Your Machine
To congure the E-mail Settings of your machine, follow the 3 sub steps below:
● “Step 2-1 Checking the E-mail Settings of the Computer” P.53
● “Step 2-2 Setting the E-mail Address for Your Machine” P.54
● “Step 2-3 Conguring Your Machine’s E-mail Settings” P.54
Check the values for each item in the Setup Information Form through the above steps.
 Setup Information Form
No. Item Outline Introduction Example
User Value
* You can look at the following pages
and make notes on the details you
have checked or the settings you
have congured.
B-1 E-mail address for
your machine
The e-mail address used when
sending e-mails from the machine
mc362@test.
com
(Up to 80 characters)
B-2 SMTP server address The address of the server used
when sending e-mails
smtp.test.com
B-3 POP3 server address The address of the server used
when receiving e-mails
pop3.test.com
B-4 Authentication
method
Sending mail server authentication SMTP
B-5 SMTP user ID Sending mail server account name OKIMC562
B-6 SMTP password Sending mail server password okimc562
B-7 POP user ID Receiving mail server account name user
B-8 POP password Receiving mail server password okimc562
B-9 Name of the e-mail
destination
The name of the recipient to whom
you are sending a scan-to-mail from
the machine
User
B-10 E-mail address of the
e-mail destination
The e-mail address of the recipient
to whom you are sending a scan-to-
mail from the machine
user@test.com
 Step 2-1 Checking the E-mail
Settings of the Computer
Note
● If a network administrator species values such as mail
server account, password and e-mail address for your
machine, enter them in the Setup Information Form.
Memo
● The procedure below uses Windows Live Mail on Windows
7. If you are using different mail software, refer to the
manual for the e-mail software.
1 Click [Start] and select [Windows Live
Mail].
2 Select the [Tools] menu > [Accounts].
If the menu bar is not displayed, click the
[Menus] icon and then select [Show menu
bar].
3 Select the mail account and then click
[Properties].

Oki MC352 Specifications

General

Print Technology	LED
Print Resolution	1200 x 600 dpi
Copy Resolution	600 x 600 dpi
Fax	Yes
Fax Transmission Speed	33.6 Kbps
Paper Capacity	250 sheets
Multi-Purpose Tray Capacity	100 sheets
ADF Input Capacity	50 sheets
Maximum Input Capacity	350 sheets
Standard Output Capacity	150 sheets
Maximum Print Size	A4
Internal Memory	256 MB
Processor Frequency	533 MHz
Dimensions	427 x 509 x 444 mm
Weight	29 kg
Operating System Compatibility	Windows, Mac OS, Linux
Monthly Duty Cycle	45, 000 pages
Scanner Type	Flatbed/ADF
Scan Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet
Display	3.5 inch LCD