Oki MC352 User Manual

- 50 -
Scanning to E-mail
4
Scanning
Memo
● If conguring a small network consisting of only your
machine and a computer, set IP addresses as shown
below (according to RFC1918).
For the computer
IP address : 192.168.0.1~254
Subnet mask : 255.255.255.0
Default gateway : not used
DNS server : not used
For the machine
IP Address Set : Manual
IPv4 Address : 192.168.0.1~254
(select a different value
from the computer)
Subnet Mask : 255.255.255.0
Gateway Address : 0.0.0.0
Network Scale : Small
● To set [Network Scale], press the <SETTING> key
and then select [Admin Setup] > [Network Menu] >
[Network Setup] > [Network Scale].
1 Prepare an Ethernet cable and a hub.
Prepare an Ethernet cable (category 5, twisted
pair, straight) and a hub separately.
2 Hold down the power switch for
approximately one second to turn off the
power.
3 Plug one end of the Ethernet cable into
the network interface connection on the
back of the machine.
4 Plug the other end of the Ethernet cable
into the hub.
5 Hold down the power switch for
approximately one second to turn on the
power.

Oki MC352 Specifications

General

Print Technology	LED
Print Resolution	1200 x 600 dpi
Copy Resolution	600 x 600 dpi
Fax	Yes
Fax Transmission Speed	33.6 Kbps
Paper Capacity	250 sheets
Multi-Purpose Tray Capacity	100 sheets
ADF Input Capacity	50 sheets
Maximum Input Capacity	350 sheets
Standard Output Capacity	150 sheets
Maximum Print Size	A4
Internal Memory	256 MB
Processor Frequency	533 MHz
Dimensions	427 x 509 x 444 mm
Weight	29 kg
Operating System Compatibility	Windows, Mac OS, Linux
Monthly Duty Cycle	45, 000 pages
Scanner Type	Flatbed/ADF
Scan Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet
Display	3.5 inch LCD