To Next Page

To Previous Page

- 82 -

Scanning to Computer

Scanning

 Step 2 Installing Driver and Software

The following procedure installs a scanner driver

and ActKey at once.

1 Check that your machine and the

computer are turned on and connected,

and then insert the”Software DVD-ROM”

into the computer.

2 Click [Run Setup.exe] after [AutoPlay]

is displayed.

If the [User Account Control] dialog box is

displayed, click [Yes].

3 Select the language.

4 Select the device of your machine, and

then click [Next].

5 Read the license agreement and then

click [I Agree].

6 Read “Environmental advice for Users”

and click [Next].

7 Check that [Scanner driver] and

[ActKey] are selected, and then click

the Install bunch button.

Memo

● By default, [PCL driver], [Scanner driver], and

[ActKey] are selected. Deselect [PCL driver] if it is

unnecessary or has been installed on the computer

already.

8 If the [Windows Security] dialog box

is displayed, click [Install this driver

software anyway].

9 Click the [Network] button.

The device search starts.

- If the machine is detected, it is

automatically installed. Proceed to step

11.

- If the machine is not detected, the

[Review your installation settings.]

screen is displayed. Proceed to step 10.

Oki MC362dw Startup Guide

Other manuals for Oki MC362dw