2.OPERATIONS WITH THIS EQUIPMENT
Managing User Boxes/Folders 29
2 OPERATIONS WITH THIS EQUIPMENT
2
Press the [BOX SETTING] tab, select the user box that you want to edit, and then press
[EDIT].
Press or to switch the pages. You can also directly specify the box number (3-digit) the using digital keys.
y Password entry
When the password has been set to the selected user box, the password entry screen is displayed. In this case,
press [PASSWORD], enter the password using the digital keys or the on-screen keyboard, and then press [OK].
y You can also enter the administrator password to open the user box instead of the password.
y The password input is displayed in the blank symbols.
3
Change [BOX NAME] / [PASSWORD] / [RETYPE PASSWORD] as necessary, and then
press [OK].
The instructions of the operating procedure of [BOX NAME] / [PASSWORD] / [RETYPE PASSWORD] settings are
omitted, because they are the same as those for creating user boxes.
P.26 “Creating user boxes”
To Next Page
Loading...
