EasyManuals Logo

Oki ML186 Safety & Warranty

Oki ML186
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8 - English
Reactivity Data __________________
Stability:
Stable.
Materials to Avoid:
Not applicable.
Polymerization:
Will not occur.
Hazardous Decomposition or Byproducts:
None.
Incompatibility:
None.
Preventive Measures______________
Personal Protective Equipment
Respiratory Protection:
Not normally required.
Protective Gloves:
Not normally required. For large spills,
use rubber gloves during cleanup.
Eye Protection:
Not normally required. For large spills,
use safety goggles during cleanup.
Engineering Controls
Ventilation:
Outside of normal ventilation, not normally
required.
Other Protective Equipment and/or Hygienic
Practices:
None.
Spill Cleanup
If ribbon is inadvertently released, it should be rewound.
Waste Disposal
Prevent release of material into natural waters and
sewers.
Follow appropriate federal, state and local regulations.
Precautions
Precautions for Handling:
Do not pull ribbon out of
cartridge. Keep out of reach of children.
Precautions for Storage:
Store in a cool, dark place.
Other Precautions:
None.
Shipping Information
Special Shipping Information:
Non hazardous, Do not
drop. Keep dry.
UN Number:
Not applicable.
Hazards Class
: None.
User’s Responsibility ______________
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each aspect
of your operation must be examined in regard to if, or
where, additional precautions may be necessary. All health
and safety information contained in this bulletin must be
provided to your employees or customers. It is your
responsibility to use this information to develop appropriate
work practice guidelines and employee instructional
programs for your operation.
Preparation Date of MSDS __________
Date:
December 15, 2010.
Prepared by:
Oki Data Americas, Inc.
Engineering Services Department
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
my.okidata.com

Other manuals for Oki ML186

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki ML186 and is the answer not in the manual?

Oki ML186 Specifications

Technology and Print Characteristics IconTechnology and Print Characteristics
printhead9-Pin SIDM
graphics resolution240 (H) x 216 (V) dpi maximum
feed rate2.0 ips
character pitch10, 12, 15, 17.1 and 20 cpi
print speed62.5 cps (NLQ), 250 cps (Utility), 333 cps (HS Draft), 375 cps (SS Draft)
matrix12 x 17 (NLQ), 12 x 9 (Utility), 10 x 9 (HS Draft), 8 x 9 (SS Draft)
Emulation, Interface and Memory IconEmulation, Interface and Memory
co-resident emulationsIBM 2480, Epson ESC/P, OKI MICROLINE
interfaceIntegrated USB and IEEE Parallel, Optional RS-232C Serial, Ethernet via OkiLAN 6020e
memory128K Receive Buffer
Paper Handling IconPaper Handling
paper inputSingle-part, Multi-part, Continuous forms, Cut sheet, Card stock, Envelopes, Labels
number of copies4-part Rear Feed, 5-part Bottom Feed
thickness0.011" (0.28mm) maximum
Warranty and Reliability IconWarranty and Reliability
limited warranty3-Year parts and labor, 2-Year printhead
MTBF20, 000 hours (25% duty cycle/35% page density)
monthly workload13, 000 pages at 25% duty cycle/35% density
printhead life200 million characters avg. in 10 cpi utility mode at 25% duty, 35% page density
ribbon life3 million characters (Utility mode)
Environmental IconEnvironmental
size14.65" x 10.83" x 3.15" (37.2 cm x 27.5 cm x 8.0 cm)
net weight10 lb. (4.5 kg)
acoustic noise58 dBA

Related product manuals