Printing Envelopes with the CSF
Printing Envelopes with the CSF
You can use #10 envelopes (standard business size) in your CSF3001 and in the front bin only of
the CSF 3002.
Be sure to adjust the head gap lever (5-9) and push the envelope lever back.
Load envelopes with the flaps facing down and toward the front of the printer. Set the envelope
lever to the rear.
For best results, avoid printing on areas where the flap overlaps the envelope. Printing may be
uneven in places where the envelope varies in thickness.
ML3410 ( 96-02-07 )
To Next Page
Loading...
