Oki ML3410 User Manual

Making Selections
Making Selections
Before you begin, press the PRINT button to get a list of groups, items, and settings. This list will
tell you what the current settings are for your printer. Use this list to find your way around in the
menu.
Each time you press the GROUP, ITEM, or SET button, the appropriate menu line will print on the
paper.
Press the GROUP button to move from group to group. If you pass the group that you want, just
keep cycling through. It will come up again. Press the ITEM button to move between the items in
a group.
Press the SET button to cycle through the settings for an item. To choose a setting, press the SET
button until you come to the setting you want then press the ITEM button to move on to the next
item.
Press the EXIT button to save your changes and leave the menu.
See Appendix A for a list of the menu items and factory settings (
).
Note
To reset the printer to the factory menu settings, turn the printer off, then hold down the SELECT
and LINE FEED buttons while you turn it back on.
To reset both the menu and the paper loading position, turn the printer off, then hold down the
SELECT and TOP OF FORM buttons while you turn it back on.
ML3410 ( 96-02-07 )

Oki ML3410 Specifications

Print Specifications

printhead	9 pin
print speed at 10 cpi	HSD 550 cps, Utility 417 cps, NLQ 104 cps
graphics resolution	1445216 dpi maximum

Paper Handling

paper weight	12 to 24 lb
paper thickness top feed	0.36 mm (0.014 inches) maximum
paper thickness bottom feed	0.50 mm (0.020 inches) maximum

Operating Environment

operating temperature	50 to 104 degrees F (10 to 40 degrees C)
storage temperature	14 to 122 degrees F (-10 to +50 degrees C)
humidity	20 to 80% RH

Electrical Requirements

voltage	120 volts, +5.5%/-15% 220/240 volts, ±10%
frequency	50/60 Hz, ±2 Hz
power idling	30 watts
power operating	75 watts

Weight and Dimensions

width	25-1/4 inches (540 mm)
depth	19 inches (483 mm)
height	15 inches (203 mm)
weight	63 lbs. (25.4 kg)