Oki ML3410 - EpsonIBM Model: Width & Graphics Codes

Double Width
(Expanded)
Printing
ESC W n 27 87 n 1B 57 n n=1: Start double
width printing n=0:
Stop double width
printing
Immediate Double
Width
SO or ESC SO 14 or 27 14 0E or 1B 0E Prints double width
only to end of line;
can also be
canceled by DC4,
ESC W 0 and ESC
! commands.
Stop Immediate
Double Width
Printing
DC4 20 14 Only cancels
double width set
by SO or ESC SO.
Double Height
Printing
ESC w n 27 119 n 1B 77 n n=1: Start double
height n=0: Stop
double height
Graphics For all graphics
commands the
number of dot
columns of graphic
data is as follows:
dots=n + (n256)
Print Graphics ESC * m n n
[graphic data]
27 42 m n n
[graphic data]
1B 2A m n n
[graphic data]
Selects 8-pin
graphic mode and
prints graphic
data. m=0: Single
density, 60 dpi
m=1: Double
density, 120 dpi
m=2: Fast double
density, quasi-120
dpi m=3:
Quadruple density,
quasi-240 dpi
m=4: CRT I, 80 dpi
m=5: Plotter, 72
dpi m=6: CRT II,
90 dpi m=7: DD
Plotter, 144 dpi
Single Density
Graphics
ESC K n n
[graphic data]
27 75 n n [graphic
data]
1B 4B n n [graphic
data]
Same as ESC *
``0.''
Double Density
Graphics
ESC L n n [graphic
data]
27 76 n n [graphic
data]
1B 4C n n [graphic
data]
Same as ESC *
``1.''
Quasi-Double
Density Graphics
ESC Y n n
[graphic data]
27 89 n n [graphic
data]
1B 59 n n [graphic
data]
Same as ESC *
``2.'' Same as low
speed double
density, but printer
can't put two
adjacent dots in
the same row.
ML3410 ( 96-02-07 )