Oki ML3410 User Manual

Initialize ESC CAN 27 24 1B 18 Resets printer:
printbuffer cleared,
printfeatures default
tomenu settings,
pageformat features
andDLL memory
storagenot affected.
Cancel CAN 24 18 Clear print buffer.
Nofeatures are
affected.
Begin quiet mode ESC 27 60 1B 3C Print at speed
toreduce noise.
End quiet mode ESC 27 62 1B 3E Normal speed
andnoise level.
Graphics
Set Single
DensityGraphics
ESC P or
ESC Q
27 80 or 27 81 1B 50 or 1B 51 Horizontal
graphicsdensity 60
dpi. At 12cpi,
horizontal densityis
72 dpi. Sets
densityonly.
Set Double
DensityGraphics
ESC R 27 82 1B 52 Horizontal
graphicsdensity 120
dpi. At 12cpi,
horizontal densityis
144 dpi. Sets
densityonly.
Quasi
QuadrupleDensit
y
ESC # Q 27 35 81 1B 23 51 Horizontal
graphicsdensity 240
dpi. At 12cpi,
horizontal densityis
288 dpi.
Adjacentdots not
permitted inthe
same row.
Enter
GraphicsPrint
Mode
ETX 3 03 All following data
isinterpreted as
graphicinformation
except aslisted
below. Once ETXis
received, it is
ignoredexcept in the
combina-tions
indicated.
LF + CR ETX SO 3 14 03 0E Graphics line feed
withcarriage return
LF only ETX DC4 3 20 03 14 Graphics line feed
only
ML3410 ( 96-02-07 )

Oki ML3410 Specifications

Print Specifications

printhead	9 pin
print speed at 10 cpi	HSD 550 cps, Utility 417 cps, NLQ 104 cps
graphics resolution	1445216 dpi maximum

Paper Handling

paper weight	12 to 24 lb
paper thickness top feed	0.36 mm (0.014 inches) maximum
paper thickness bottom feed	0.50 mm (0.020 inches) maximum

Operating Environment

operating temperature	50 to 104 degrees F (10 to 40 degrees C)
storage temperature	14 to 122 degrees F (-10 to +50 degrees C)
humidity	20 to 80% RH

Electrical Requirements

voltage	120 volts, +5.5%/-15% 220/240 volts, ±10%
frequency	50/60 Hz, ±2 Hz
power idling	30 watts
power operating	75 watts

Weight and Dimensions

width	25-1/4 inches (540 mm)
depth	19 inches (483 mm)
height	15 inches (203 mm)
weight	63 lbs. (25.4 kg)