MPS9650c User’s Guide> 46
I
NTERFACES
AND
CONNECTION
Your printer is equipped with a selection of data interfaces:
> Parallel – For direct connection to a PC. This port requires a
bi-directional (IEEE 1284 compliant) parallel cable.
> USB – This port requires a cable conforming to USB version
2.0 or above.
The printer may not work if a USB- compatible device is
connected concurrently with other USB-compatible machines.
When connecting multiple printers of the same type, they
appear as *****, ***** (2), ***** (3), etc. These numbers
depend on the order of connecting or turning on each printer.
> Ethernet – For network cable connection.
NOTE
Interface cables are not supplied with your printer.
To Next Page
Loading...
Need help?
General
