MPS9650c User’s Guide> 64
I
NSTALLING
ACCESSORIES
Each accessory (apart from the Finisher) comes complete with its
own documentation which gives full instructions on installation.
You are advised to follow these instructions carefully.
After installation, print out a Menu Map (Configuration document)
to check that the installation has been successful.
NOTE
The Finisher and Punch unit must be installed by an authorized
engineer.
For the following accessories, you have to make the appropriate
setting in your printer driver(s):
> duplex unit
> paper tray(s)
> Finisher
Refer to the Printing Guide for driver setting details.
To Next Page
Loading...
Need help?
General
