Why are pages curling excessively from my Oki Printer?
If your Oki Printer is printing pages that curl excessively, turn the paper over in the tray, noting the arrow on the paper package, and install the paper print side down. Also, avoid storing paper in areas of excessive temperature and humidity, and keep it in protective wrapping. The recommended operating humidity is 20-80%.
How to fix input jam in Oki N22200B Printer?
If your Oki Printer is experiencing an input jam, begin by removing the paper tray from the printer. Then, remove any crumpled or folded paper. Next, remove any paper from the underside of the printer. Finally, replace the paper tray.
Why does my Oki N22200B print entire page faintly?
If the entire page prints faintly on your Oki Printer, it could be due to an empty toner cartridge. Replace the toner cartridge. Another possible cause is a dirty LED array, which requires cleaning.
Why is my Oki N22200B printing faded?
To resolve faded print on your Oki Printer, first ensure that the toner cartridge is correctly installed. If the issue persists, the toner may be low, and you should replace the toner cartridge.
What to do if my Oki N22200B Printer prints blank sheets?
If your Oki Printer is printing blank sheets, it might be due to the image drum cartridge not being properly installed. Try reinstalling it. Alternatively, the toner cartridge might be empty or missing. In that case, install a new toner cartridge.
How to resolve feed jam or exit jam in Oki N22200B Printer?
To address feed or exit jams in your Oki Printer, remove the tray and clear any misfed sheets. Open the printer’s top cover and carefully lift out the image drum with the toner cartridge. Remove any jammed sheets from the paper path. Re-install the image drum and toner cartridge, ensuring correct placement. Lower the top cover without latching it yet. Remove any jammed paper from the stackers and rear path, and check the duplex unit and under the Paper Guard for jams. Open the Multi Purpose Tray and remove any paper. Finally, close the top cover and latch it. The printer will then warm up and resume printing.
Why does my Oki N22200B print vertical white streaks or faint areas?
If your Oki Printer is showing vertical white streaking or faint areas on the page, replace the toner cartridge because the toner is low and not distributing properly. Check the drum and replace it if necessary. If problems persist, contact service. Another possible cause is a dirty LED array, so try cleaning it.
Why does my Oki N22200B Printer print vertical black lines?
If your Oki Printer is printing vertical black lines, this indicates a hardware problem. Contact service for assistance.
What to do if printing does not resume after removing jammed paper from Oki N22200B Printer?
If printing does not resume after removing jammed paper from your Oki Printer, try opening and closing the top cover.
Why does my Oki N22200B Printer produce smeared or blotched print?
If you're experiencing smeared or blotched print with your Oki Printer, replace the image drum and toner, as this could be due to dirty rollers, toner dropped inside the printer, or an image drum problem. For further assistance, contact service.
To Next Page
General
