Oki PT330 - Connecting the AC Adapter and Cable

16
4-4. Connecting the AC Adapter and Cable
Standard Model
(1) Connect the cable connector of the AC adapter to the power connector.
Power Connector
Flat Side
Cable Connector
AC Adapter
Connector
AC Inlet
Power Cable
AC Adapter
Caution: Before connecting the AC adapter, turn off the power switches
on the printer and all the devices connected to the printer. Also,
remove the plug of the AC adapter power cable from the outlet.
Caution: Use the specified AC adapters.
Caution: Perform the adapter connection with the device placed vertically
for easy operation.
Caution: As the connector is clipped in place after insertion in order to
prevent it from falling off, when performing insertion, (1) grip the
cable base with one hand, (2) slide the outer part of the
connector upwards with the other hand (3) and push in until it
locks into place.
③
Cable Base
②
①
Th
e Outer Section of the Connector