Oki PT330 - Setup Settings

54
9-3. Setup Settings
Setting Groups
Settings Group Description
1
Memory Switch 1
Memory Switch 1 settings
2
Memory Switch 2
Memory Switch 2 settings
3 Print
Print settings
4 Hardware
Hardware settings
5 Interface Serial and USB interface settings
(This group is not displayed on printers with a LAN interface.)
Setting Items and Detailed Setting Items
(Note) Setup items and the default values depend on the printer model and/or area.
(1) Memory Switch 1 Group
Item Description Setting Value
1
Power On Status
Specifies Power ON notification.
1
2
Enable
Disable
2
Receive Buffer
Specifies receiver buffer size.
1
2
45bytes
4Kbytes
3 Busy Condition
Sets the printer as BUSY (data
reception not available).
1
2
Buffer full
Offline/Buffer full
4 Receive Error
Specifies what to do when a receive
error occurs using the serial interface.
1
2
?Print
Ignore
5 Auto LF
Specifies whether the CR code
generates an automatic line feed.
1
2
Enable
Disable
6 DSR(#6)Reset
Specifies whether receiving DSR
(#6) via the serial interface triggers a
hardware reset.
1
2
Enable
Disable
7 INIT(#25)Reset
Specifies whether receiving INIT
(#25) via the serial interface triggers
a hardware reset.
1
2
Enable
Disable
8 USB Soft Reset
Specifies whether a USB Soft Reset
triggers a hardware reset when using
printer class USB.
1
2
Enable
Disable