Oldham MX48 - Page 42

43
This is the time interval between exceeding of the
AL threshold and triggering of the corresponding
visual alarm (LED).
Display the time using keys:
-
←
→
+
→ then
ENTER
In “Parking” mode: this is the time interval between
stopping of relay 1 and starting up of relay 2.
Display the time using keys:
-
←
→
+
→ then
ENTER
Negative Positive
-
←
→
+
→ then
ENTER
Control of relay 3 (common) by any triggering of
buzzer
NO YES
-
←
→
+
→ then
ENTER
Utilization of common audio alarm (buzzer)?
(Function in series with buzzer jumper)
NO YES
-
←
→
+
→ then
ENTER
YES = If copy of buzzer on alarm 3 and with buzzer
option into service : audible alarm will be triggered
when there is an alarm.
NO = The common audible alarm (buzzer) will be
triggered for a 30 seconds maximum time (even
there is an alarm).
-
←
→
+
→ then
ENTER
Response time
[00 : 00 : 00]
P
P
P
P
P
Relay safety
[Negative]
Relay 1&2 stop T
[00: 00 : 00]
Buzzer transferred
[NO]
Buzzer connected
[NO]
Continuous buzzer
[NO]
END OF MENU
H mn sec
H mn sec