Need help?Do you have a question about the Oldham BM25 and is the answer not in the manual?
General| Operating Temperature | -20°C to +50°C |
|---|---|
| IP Rating | IP66/67 |
| Gases Detected | O2, CO, H2S |
| Alarm | Audible, Visual, and Vibrating |
| Display | LCD |
| Measurement Range | 0-100% LEL |
| Resolution | 1% LEL |
| Accuracy | ±5% |
| Response Time | <15 seconds |
| Sensor Type | Catalytic |
Explains how to connect charging ports and other interfaces on the device.
Describes the types, features, and configuration of the smart, interchangeable gas sensors.
Details the battery pack and its expected life under various conditions.
Instructions for charging the device using vehicle or universal chargers.
How to connect multiple BM 25 units to transfer alarms.
Guides the user through the initial power-on and self-tests.
Operation using an internal electric pump or external aspirator for remote sensing.
Details visual and audible indicators, gas alarm types, and acknowledgement.
Introduces radio communication capabilities and network topologies.
Procedure to enter maintenance menus using access codes.
Guidelines for using the device in hazardous areas, including prohibited operations.
Lists ATEX and IECEx certifications and markings for the device.
To Next Page
