Memory Seat
11
The memory function
...................
__
..........................
controls both the driver’s seat
and outside mirror positions.
CE)
First, position the seat and
mirrors where you want
them. Next, press the SET
button. You will hear one
beep. Within five seconds,
11
prek either the
1
or
2
button.
............................................
-
.......
I
You will hear two beeps.
The seat and memory positions will be stored for the
number pressed. Repeat the procedure to store another
position with the other number’if desired.
To
adjust the
seat and mirrors to the stored position, press the number
corresponding to the position. The memory function will
only work with the gearshift in PARK
(P).
To stop the automatic movement, move the seat switch
in any direction. For easier exiting, press the
1
and
2
buttons at the same time to move the seat completely
down
and
back.
Remote
Lock
Control Personalization
Feature
Each Remote Lock Control transmitter can be
programmed to move the driver’s seat and outside
mirrors to a set memory position when the transmitter’s
UNLOCK button is pressed. For programming
instructions, see “Personalization Features” in the Index.
To Next Page
Loading...
