To
remove and store the cornfort guides,’just perform
these steps in reverse order. Squeeze the belt edges
together
so
that you can take them out from the guides.
Pull
the guide upward to expose its storage clip, and
then slide the guide onto the clip. Rotate the guide and
clip inward and
-in
between the seatback and the interior
body, leaving only the loop
of
elastic cord exposed.
Center Passenger Position
U
4.
Buckle, position and release the safety belt as
described in “Rear Seat Outside Passenger Positions”
earlier
in this section. Make sure that the shoulder
belt crosses the shoulder.
1-30
To Next Page
Loading...
Need help?
General
