Lap
Belt
To
make the belt shorter, pull its free end as shown until
the belt is snug.
When you sit in the center seating position, you have a
lap safety belt, which has no retractor.
To
make the belt
longer, tilt the latch plate and pull it along the belt.
Buckle, position and release it the same way as the lap
part of a lap-shoulder belt. If the belt isn’t long enough,
see “Safety Belt Extender” at the end of
this
section.
Make sure the release button on the buckle is positioned
so
you would be able to unbuckle the safety belt quickly
if
you ever had to.
1-31
To Next Page
Loading...
