Operating the RECIRC mode in cold temperatures or
under high humidity conditions may cause moisture to
form on the inside of the windshield. If this condition
occurs, deselect the RECIRC button.
A/C
ON:
Press this button to turn the air conditioning
on and off. If the system is operating in the automatic
mode, the A/C
ON
indicator light will automatically
illuminate.
In
the auto mode, the A/C compressor will
only operate when the system determines it is needed.
OFF:
Rotate the AUTO-PUSH knob to the OFF
position. Turning the system off will cause the fan to
turn off and the airflow to be directed out the lower floor
outlets. The system will still try to keep the interior of
the vehicle at the previously chosen comfort setting. The
outside temperature will show in the display when the
system is
OFF.
Air
Conditioning
The air conditioner cools, dehumidifies and filters the
air for the inside of the vehicle.
The air conditioning compressor is enabled in all
modes unless the A/C
ON
button
is
in the off position
(indicator light will not be illuminated). However, the
air conditioning compressor will not operate when the
outside temperature is below 44°F
(7
"C). When the
air conditioner is on, you may sometimes notice slight
changes in your vehicle's engine speed and power. This
is normal, because the system is designed to cycle the
compressor on and off
to
keep the desired cooling and
help fuel economy.
On very hot days, open the windows long enough to let
the hot
air
out.
This
reduces the
time
required to cool the
interior of the vehicle to a comfortable level.
If
the
system is in the automatic mode (AUTO-PUSH knob
indicator light
is
on), during very hot days the system
will automatically
go
to the RECIRC mode and the
temperature door will
be
positioned at the
full
cold position
for maximum cooling. You can choose the extreme comfort
setting of
60°F
(
16
"
C), but the system will not cool
any
faster by choosing the extreme comfort setting.
To Next Page
Loading...
Need help?
General
