,stment
Your car has a shoulder belt tightness adjustment
feature. If the shoulder belt seems too tight, adjust it
before you begin to drive.
1. Sit well back in the seat.
2.
Start pulling the shoulder belt out.
4.
Let the belt go back all the way. You should hear a
slight clicking sound.
If
you don’t, the adjustment
feature won’t set, and you’ll have to start again.
5.
Now you can add a small amount of slack. Lean
forward slightly, then sit back. If you’ve added more
than 1 inch
(25
mm) of slack, pull the shoulder belt
out as you did before and start again.
3.
Just before it reaches the end, give it
a
quick pull.
If
you move around in the vehicle enough,
or
if you pull
out the shoulder belt, the belt will become tight again. If
this happens, you can reset it.
1-13
To Next Page
Loading...
Need help?
General
