7.
Remove any rust or dirt
from the wheel bolts,
mounting surfaces and
spare
wheel.
5.
Raise the vehicle
by
rotating the wheel wrench
clockwise
in
the jack. Raise the vehicle far enough
off
the ground
so
there’s enough room for the spare
tire to fit.
6.
Remove all the wheel nuts and take off the flat tire.
3
Rust or dirt on the wheel, or on the parts to
which it is fastened, can make the wheel nuts
become loose after
a
time. The wheel could come
off and cause an accident. When
you
change a
wheel, remove any rust or dirt from the places
where the wheel attaches to the vehicle. In an
emergency,
you
can use
a
cloth or
a
paper towel
to do this; but be sure to use
a
scraper or wire
brush later, if you need to, to get all the rust or
dirt off.