For battery replacement, use a Duracell@battery, type
DL-2032, or a similar type.
To
replace the battery:
1.
Insert a coin into the notch near the keyring.
Turn
the
coin counterclockwise to separate the two halves of
the transmitter.
2.
Once the transmitter
is
separated, use a pencil to
remove the old battery.
Do
not use a metal object.
3.
Replace the battery as the instructions under the
cover indicate.
Be sure not to touch any of the black boxes or the
green surfaces. Any static transferred from your
body
to
these areas may cause the transmitter to
be inoperative.
4.
Snap the transmitter back together tightly
to
be sure
no moisture can enter.
5.
Resynchronize the transmitter by pressing and
holding the
LOCK
and
UNLOCK
buttons for eight
seconds in range
of
the vehicle. Once the transmitter
is
resynchronized, the horn will chirp and the
exterior lamps will flash once.
To Next Page
Loading...
Need help?
General
