Personalization Programming
The delayed locking feature can be turned on or off for
each driver’s remote lock control transmitter.
To
turn the feature on:
1.
Press and hold the lock position on the driver’s
power door lock switch throughout this procedure.
All of the doors will lock.
2.
Press the UNLOCK button on the transmitter to
enter the programming mode. The lock delay is still
off
and all doors will remain locked.
3.
Press the
UNLOCK
button on the transmitter again.
Lock delay is now active and all doors will unlock.
4.
Release the power door lock switch.
To
turn the feature
off,
repeat this procedure.
This procedure changes the mode for only the
transmitter used to change this setting. The procedure
will need to
be
repeated for the second transmitter.
Rear Door
Security
Locks
To
Use
One
of
These
Locks
1. Open
one
of the rear doors.
2.
Move the lever on the
door all the way up to
the ENGAGED position.
3.
Close the door.
4.
Do
the same thing to the other rear door lock.
The rear doors of your vehicle cannot be opened from
inside when this feature is in use.
Your vehicle is equipped with rear door security locks
that help prevent passengers from opening the rear doors
of your vehicle from the inside.
2-7
To Next Page
Loading...
Need help?
General
