Outside Power Mirrors
The controls for the outside power mirrors are located
on the driver’s door armrest.
Press the left or right side of the
UR
selector switch
or right mirror.
To adjust the mirror, use one of the four arrows located
on the control pad to move the mirror in the direction
you want it to go. When finished adjusting the mirrors,
to prevent unwanted mirror movement in case the
I---L-^~
L
----
rL
rL.,
---+,--I
--A
+c.
nh,,mn
+hn
I-$+
lu~ateu
UGIIG~LII
LIIG
~WIIIIWI
pau
LU
WIUU~G
LIIG
I’CIIL
I--*.-
+h-
I
ID
AAI~~+-W
nna,i+nh
thn
rrnntnr
nncitinn
~edve
11
IG
u
n
~GIGLLUI
~VVILLI
I
11
I
LI
IC ~CI
ILGI
~UJILIUI
I,
control pad is accidentally bumped while driving. Adjust
each outside mirror
so
that you can see a little of
your vehicle and the area behind your vehicle.
If your vehicle is equipped with the memory function,
the mirrors and driver’s seat position can be stored into
memory. See
Memory Seat and Mirrors on page
2-48.
Outside Curb
View
Assist Mirror
If you have the memory seat and mirrors feature, the
passenger’s outside power mirror also includes a
tilt-down feature that operates when the shift lever is in
REVERSE
(R).
When the vehicle is shifted out of
REVERSE
(R),
the passenger’s mirror will return to its
original position after a five-second delay. This delay
prevents movement of the mirror
if
multiple gear
transitions (REVERSE
(R)
to
DRIVE
(D)
to
REVERSE
(R))
occur during a parallel parking
maneuver. This feature can be programmed on or
off
through the
DIC.
See
Driver Information Center (DIC)
on
page
3-45
or
DIC Vehicle Personalization on page
3-52
fer
prqrs.~?min~
instrwtinns
\/phi&x
are
rieIi\/ered
with this feature off.
2-37
To Next Page
Loading...
