Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
1.
Open the trunk.
2.
Turn the screws located inside
of
the trunk
3.
Remove the plastic trim piece from the trunk.
4.
Pull the carpeting away from the rear corner
of
the
counterclockwise and remove them.
trunk.
5.
Remove the three nuts holding the lamp in place
and remove the lamp assembly.
6.
While pressing the release, turn the bulb socket
assembly counterclockwise to remove it from the
lamp assembly.
7.
Pull the bulb straight out to remove it from the
socket.
8.
Replace the bulb and reverse the steps to reinstall
the lamp assembly.
Replacement
Bulbs
StotiTaillamDs
I-
~
Rear Turn Signal Lamps
I
3057
1
For any bulb not listed here contact your dealer.
5-58
To Next Page
Loading...
