Climate
Controls
Automatic Climate Control System
With this system you can control the heating, cooling
and ventilation for your vehicle.
Automatic
Operation
AUTO (Automatic):
When both the mode knob and the
fan knob are in the AUTO mode and the temperature
is set, the system will automatically control the
inside temperature, the air delivery mode and the fan
speed.
1.
Press both the mode and the fan knobs to place
2. Adjust the temperature to
75"
F
(24"
C)
on the
the system
in
AUTO.
display.
Choosing the coldest or warmest temperature
setting will not cause the system to heat or
cool
any
faster.
If
you set the system at the warmest
temperature setting, the system will remain in
manual mode at that temperature and it will not go
into automatic mode.
In cold weather, the system will start at reduced fan
speeds to avoid blowing cold air into your vehicle
until warmer air is available. The system will
start out blowing air at the floor but may change
modes automatically as the vehicle warms up
to maintain the chosen temperature setting. The
length
of time needed for warm up will depend on
the outside temperature and the length of time
that has elapsed since your vehicle was last driven.
3. Wait for the system to regulate. This may take from
10
to 30 minutes. Then adjust the temperature.
if
necessary.
3-23
To Next Page
Loading...
