Replacing
Brake
System
Parts
The braking system on a vehicle is complex. Its many
parts have to be of top quality and work well together
if
the vehicle
is
to have really good braking. Your
vehicle was designed and tested with top-quality GM
brake parts. When you replace parts of your braking
system
-
for example, when your brake linings
wear down and you need new ones put in
-
be sure
you get new approved GM replacement parts. If
you don’t, your brakes may no longer work properly. For
example,
if
someone puts in brake linings that are
wrong for your vehicle, the balance between your front
and rear brakes can change
-
for the worse. The
braking performance you’ve come to expect can change
in many other ways
if
someone puts in the wrong
replacement brake parts.
Battery
Your new vehicle comes with a maintenance free
ACDelco@ battery. When it’s time for a new battery, get
one that has the replacement number shown on the
original battery’s label. We recommend an ACDelco
battery.
Warning: Battery posts, terminals and related
accessories contain lead and lead compounds,
chemicals known to the State of California to cause
cancer and reproductive harm. Wash hands after
handling.
The battery is located under the rear seat cushion. To
access the battery, see
Removing the Rear Seat
Cushion
on page 5-95.
You don’t need to access the
battery to jump start your vehicle. See
Jump Starting
on
page 5-44.
-
-
~ttery
-.~t
isn’t properly vented can
let
sulfuric acid fumes into the area under the rear
seat cushion. These fumes can damage your
rear seat safety belt systems. You may not be
able to see this damage, and the safety belts
might not provide the protection needed in a
crash. If a replacement battery is ever needed,
it
must be vented in the same manner as the
original battery. Always make sure that the
vent hose
is
properly reattached before
reinstalling the seat cushion.
5-42
To Next Page
Loading...
