EasyManua.ls Logo

Oldsmobile AURORA 2003 - Care of Your CD Player; Chime Level Adjustment; Diversity Antenna System

Oldsmobile AURORA 2003
387 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Care
of
Your
CD
Player
The use of
CD
lens cleaner discs is not advised, due to
the risk of contaminating the lens of the CD optics
with lubricants internal to the
CD
mechanism.
Diversity Antenna System
Your AM-FM antennas are located in the windshield and
rear window. Be sure that the inside surfaces of the
windshield and rear window are not scratched and that
the lines on the glass are not damaged.
If
the inside
surfaces are damaged, they could interfere with
radio reception. Also, for proper radio reception, the
antenna connectors at the top-center of the front
windshield and the rear window need to be properly
attached to the posts on the glass.
Do
not apply aftermarket glass tinting. The metallic film
in
some tinting materials will interfere with or distort
the incoming radio reception.
Notice:
Do not try to clear frost
or
other material
from the inside of the front windshield or rear
window with a razor blade or anything else that is
sharp. This may damage the rear defogger grid and
affect your radio’s ability to pick up stations
clearly. This repairs wouldn’t be covered by your
warranty.
If,
when you turn on your rear window defogger, you
hear static on your radio station, it could mean that
a defogger grid line has been damaged.
If
this is true,
the grid line must be repaired.
If
you choose to add an aftermarket cellular telephone
to your vehicle, and the antenna needs to be attached to
the glass, be sure that you do not damage the grid
lines for the AM-FM antennas or place the cellular
telephone antenna over the grid lines.
Chime Level Adjustment
The volume level of the vehicle’s chimes can be
controlled by the radio. To change the volume level,
press and hold pushbutton
6
with the ignition on and the
radio power
off.
The chime volume level will change
from the normal level to loud, and LOUD
will
be
displayed on the radio. To change back to the default or
normal setting, press and hold pushbutton
6
again.
The chime level will change from the loud level
to normal, and NORMAL
will
be displayed.
3-76

Table of Contents

Related product manuals