10.
Connect the other end
of the negative
(-)
cable at least 18 inches
(45 cm) away from
the dead battery, but
not near engine
parts that move.
The electrical connection is just as good there, and the
chance of sparks getting back to the battery is much less.
Use a remote negative
(-)
terminal
if
the vehicle has
one. Your vehicle has a remote negative
(-)
terminal
marked
“G
N
D
.”
11. Now start the vehicle with the good battery and run
the engine for
a
while.
12.
Try to start the vehicle that had the dead battery.
If
it won’t start after a few tries,
it
probably needs
service.
Notice:
Damage to your vehicle may result from
electrical shorting
if
jumper cables are removed
incorrectly.
To
prevent electrical shorting, take care
that the cables don’t touch each other or any
other metal. The repairs wouldn’t be covered by
your warranty.
5-48
To Next Page
Loading...
