7.
Remove any rust or dirt
from the wheel bolts,
mounting surfaces
and spare wheel.
Rust
or dirt on the wheel, or on the parts to
which
it
is fastened, can make the wheel nuts
become loose after a time. The wheel could
come
off
and cause an accident. When you
change a wheel, remove any rust or
dirt
from
the places where the wheel attaches to the
vehicle.
In
an emergency, you can use a cloth
or a paper towel to do this; but be sure to use
a scraper or wire brush later, if you need to, to
get all the
rust
or
dirt
off.
Never use oil or grease on studs or nuts.
If
you do, the
nuts
might come loose. Your wheel
could fall
off,
causing a serious accident.
I
I
8.
Place the compact spare tire on the wheel-mounting
surface.
5-76
To Next Page
Loading...
