Shifting Out of Park (P)
Your vehicle has an automatic transaxle shift lock
control system. You have to fully apply your regular
brake before you can shift from PARK (P) when
the ignition is in ON. See
Automatic Transaxle Operation
on
page
2-26.
If you cannot shift out
of
PARK (P), ease pressure on
the shift lever
-
push the shift lever all the way into
PARK (P) as you maintain brake application. Then move
the shift lever into the gear you want. If you ever hold
the brake pedal down but still can't shift out of PARK (P),
try the following:
1.
Turn the key to the
OFF
ignition position.
2.
Apply and hold the brake until the end of Step
4.
3.
Shift to NEUTRAL
(N).
4.
Start the vehicle and then shift to the drive gear you
want.
Parking Over Things That Burn
5.
Take your vehicle to an authorized service center
as soon as you can.
2-32
To Next Page
Loading...
