28
Adjusting On Screen Displays (OSD)
To Adjust Settings:
Use the and remote buttons to adjust each Video picture setting,
as seen below:
To exit, press the Button
To Reset Factory Settings
If, at any time, you wish to go back to original factory setting, you may
do so by choosing the Default setting in the OSD Picture and Audio Sections.
Selecting "Default," will reset all OSD settings to the original
manufacture settings. The only items which will remain unaffected, are:
Clock
Auto Scan Channels
Edited Channels
Parental Control Password
Brightness
Saturation
Hue
OSD-Video
Enter
To Next Page
Loading...
General