Act Air Switch On and Off the valve from the nitrogen cylinder to activator bottle
Deb Air Switch On and Off the valve from the nitrogen cylinder to Deblock bottle
Cp A Air Switch On and Off the valve from the nitrogen cylinder to Cap A bottle
Cp B Air Switch On and Off the valve from the nitrogen cylinder to Cap B bottle
Ox Air Switch On and Off the valve from the nitrogen cylinder to Oxidizer bottle
Ox2 Air Switch On and Off the valve from the nitrogen cylinder to oxidizer2 bottle
CAGT5 Air Switch On and Off the valve from the nitrogen cylinder to amidite bottles C, A,
G, T and bottle No. 5
12346 Air Switch On and Off the valve from the nitrogen cylinder to amidite bottles No. 1,
2, 3, 4 and No. 6
7890X Air Switch On and Off the valve from the nitrogen cylinder to amidite bottles No. 7,
8, 9, 0 and X
Lid OnOff Power on and off on the lid
Top Gas Opens the valve from the nitrogen cylinder to the space above the reaction
chamber
Devac Opens the drain valve (removes vacuum)
TeAm In Opens for nitrogen cylinder to all bottles of Activator and amidites
TeAm Out Release pressure for bottle Activator and amidites
SCDO In Opens for Acetonitrile, Cap, Deb and Ox reagtens
SCDO Out Release pressure for bottle Acetonitrile, Cap, Deb and Ox reagents
Update For updating the software (instrument)
firmware Comments: In order to use the FTP server, the program must
introduced to OligoMaker through a USB-stick. OligoMaker will
remember the IP address. You can change the log code om12345.log to
your own code on both the program on the FTP-server and the USB-stick.
Cal LCD Calibrating
Quit Back to Opening Screen (Fig. 1)
To Next Page
Loading...
Need help?
General